If you are not careful when installing the 3D laser 4 wheel alignment, new problems may occur

1. When installing the computer, it must be grounded (grounded, not connected with expansion screws). If not, it can be connected to a water pipe or other conductive objects. Otherwise, the static electricity in the computer will affect the data and even damage the camera.
2. When installing the column, the column must be installed 1.7m in front of the middle of the hoist. The range is 1.5 to 2 meters.
3. When installing the beam, do not lift the camera or hit the camera to avoid affecting the stability of the camera.
4. When installing the camera cable, be sure to note that the beams under the two camera cables and 1 and 2 must be in the same row on the computer USB port, and 1 line and 2 line must be below.

The above are the 4 points you need to pay attention to when installing the 3D laser 4 wheel alignment instrument, which may be helpful to you.