ABS brake standFailures during use are inevitable, but their incidence can be reduced, which means that ABS brake stations should be regularly maintained, which can extend the service life and the accuracy of test data. Shandong Zhengneng Technology staff introduces the matters that need to be paid attention to in daily use of ABS brake stations:

First, check whether the position switch is normal. If there is no control voltage and most of the connection circuits are open, re-solder the connection wires from the power supply to the switch. Check whether the contactor is damaged.

Second, check the high-speed ABS brake test bench moving beam motor, check whether the position switch is open or short-circuited, if there is a problem, replace or disassemble the controller, then weld and clean, and dry; when measuring the motor DC resistance, check whether the motor oil and 3-phase voltage are broken, and then measure the motor DC resistance for phase difference.

3. Check whether the power indicator is normal. Check whether the power supply voltage is normal and whether the fuse is disconnected. Check whether the switch is in good contact. Check whether the contactor is in normal contact. Check whether the coil is open. Check whether the power transformer has output. Observe whether the indicator light is damaged. If damaged, replace it. Check whether the transformer is damaged. If damaged, replace it or rewind it.