News

In the hot summer, many drivers like to install 3D4 wheel alignment, but do you know how to use 3D4 wheel alignment to perform maintenance in the summer? The following editor will analyze it for every

Four target reflectors are installed on the four rims of the car, and the wheels are turned over. The camera continuously shoots the images on the target reflectors. The computer analyzes and calculat

Application scenario: Temperature: -5-46 degrees Celsius, Ambient humidity: 30%-95% RH. Power supply: single phase\/3 phase 5 wire 220v\/380v±10%, 50Hz±5%; Gas pressure: 0.4-0.5Mpa.

Application scenario: Temperature: -5-46 degrees Celsius, Ambient humidity: 30%-95% RH. Power supply: single phase\/3 phase 5 wire 220v\/380v±10%, 50Hz±5%; Gas pressure: 0.4-0.5Mpa.

The four-wheel alignment of a car usually starts from these aspects, such as the castor angle, the kingpin inclination angle, the front tire camber, and the front wheel toe. These four indicators are

The four-wheel alignment of a car usually starts from these aspects, such as the castor angle, the kingpin inclination angle, the front tire camber, and the front wheel toe. These four indicators are

Before doing a 4-wheel alignment, it is very important to understand the symptoms of the customer's car while driving. By carefully asking the customer about the situation and carefully observing the

After returning to the correct position, click the data confirmation button. The test results will be reflected in the "Test Results" column. The sign that the steering wheel is returned to the correc

After returning to the correct position, click the data confirmation button. The test results will be reflected in the "Test Results" column. The sign that the steering wheel is returned to the correc