Tire pressure testing equipment
Tire pressure equipment operating instructions:
a. 3 when the vehicle is detected, the right front wheel wake-up command is sent, 3 receives the RF information and transmits it to the upper computer through the CAN;
b. 6 when the vehicle is detected, the left front wheel wake-up command is sent, 6 receives the LF information and transmits it to the upper computer through the CAN;
c. 3 when the vehicle is detected again, the right rear wheel wake-up command is sent, 3 receives the RR information and transmits it to the upper computer through the CAN;
d. 6 When the vehicle is detected again, the left rear wheel wake-up command is sent, 6 receives the LR information and transmits it to the host computer through the CAN;
e. The paired vehicle stops at the parking line;
f. Connect OBD and scan VIN code;
g. The host computer sends the sensor ID to the receiving module on the vehicle through the CAN;
h. The upper computer commands 3 and 6 reset, waiting to detect the next car.